I’ve spent hours trying to Google this problem with not much success, could I be right in thinking that these wireless devices are not compatible with the RFK5501? It’s worth mentioning that although the devices are 433EU, the keypad is from the US, although the frequency of the wireless receiver in the keypad also operates on 433mhz.Īny suggestions would be gratefully received. I can arm the alarm and set the alarm off with the tamper trigger in the bell box, but can’t trigger the alarm with the sensors. The alarm doesn’t see any faults or open zones when the sensors are triggered with movement. The wireless module V5.3 is enrolled, all serials are in and each zone (zone 9 and onwards) has been assigned and set to 05 Interior, Stay–Away, and 109 – 8 Wireless/AML Zone has been set to yes.Īll wireless devices are working with flashing LED’s as expected. DSC DLS 5 ver.1.5 software Supported Panels: PC1616 version 4.1 + PC1808 version 4.1 + PC1832 version 4.1+.
I’ve used DLS 5 to program the RFK5501 ENG keypad which is connected to the PC1832 V4.6 board. I have 6 wireless motion sensors WLS904L-433EU and a smoke detector WLS-906NB-433EU.